Basic RC Tools Every Enthusiast Should Have

Byaiming

Basic RC Tools Every Enthusiast Should Have

Basic RC Tools Every Enthusiast Should Have in Their RC Toolbox

RC vehicles, in general, comes in two varieties:

  • Kit Version: As the name suggests, you will be provided with the parts of the vehicle and you need to assemble it on your own, that’s pretty cool right?
  • Ready to Run Version: A ready to run version is a fully assembled & ready to use car. All you need to do is to unbox, put the batteries in and take it out for a spin.

 Because you need to assemble the kit version on your own, chances are that you will be given the required tools along with the box by the manufacturer. Whereas the ready to run version comes all assembled and you don’t need to have any extra tools.

Having tools isn’t about assembling the car, you need tools for a lot of purposes. If you were to ask a professional RC driver, they will for sure ask you to spend money on a basic tool kit. But why do you need them?

No matter how good the device is assembled, you’ll have to work on your RC at some point in time either to install some modifications or at least to clean it up. For which you need to have the right tools.

This article will discuss some of the basic RC tools every enthusiast should have in their RC toolbox.

Basic RC Tools Every Enthusiast Should Have

  • Scissors & Hobby Knives: Scissors & hobby knives are a must-have tool in every RC tool kit. They can come in handy in a lot of situations and we suggest you get your hands on one at the earliest.
  • Body Reamer: If you own a custom-made car or a kit version, chances are that you would need to drill a hole on its body to install upgrades or do some modification on it. Well, that’s where you need a body reamer.
  • Pliers: Pliers are another multipurpose tool that can come in handy in situations where you need to remove a screw that’s stuck or to hold a bolt while you tighten the nut. There are different kinds of pliers and the popular ones are the pointed pliers, Wire Cutter Pliers, and Flush Cutter (also known as Diagonal Pliers/Side Cutters).
  • Out of the different kinds of pliers, Pointed Pliers are the must-have ones in your RC toolbox. If you don’t have one, you can get Pointed Pliers at the best price here.
  • Hex drivers: The functionality of this tool is obvious; it is used to tighten or to remove bolts and screws. For RC’s they mostly come in standard sizes but some manufacturers do provide hex drivers with other sizes. The commonly found sizes are 1.5mm,2.0mm,2.5mm, and 3.0mm.
  • If you don’t have a Hex key or Hex driver, you can get one here at the best price.
  • Turnbuckle Wrench: You cannot expect to use pointed pliers everywhere. For instance, you can’t expect to hold a plastic component using a plier without damaging it. A Turnbuckle Wrench would come in handy where you cannot use a Plier.
  • Heat Gun: The functionality of a heat gun is to heat a particular region without damaging it. Having a heat gun can ease up the process of changing RC tires a lot more than you can imagine.
  • Soldering Iron: This goes to both Nitro as well as Electric RC Cars’. Sometimes the joints that you have assembled might fail. In such cases, a good high temperate soldering iron will come in handy. And when you are at it, make sure that you buy a piece of lead along with it.
  • Nut Drivers: Do I even have to tell you why you need this? You need them for properly tightening nuts and bolts. If you don’t have one, get one fast.
  • Tool Box: It’s always a good thing to keep a toolbox for your home or your bike, the same thing applies here for RC Cars as well. Keep a toolbox and organize all the screwdrivers, screws, pliers, heat gun, wrenches, scissors and all the other necessary equipment organized in one single toolbox.
  • Well, these aren’t everything, there are a lot of other small but important tools you need to have in your RC toolbox. Now let’s have a look at the other basic tools, you need to get your hands on.
  • Brush: To remove the dust from your RC vehicle. Make it a habit to thoroughly clean your RC vehicle after you take it out for a spin.
  • Screw tray: A proper screw tray will help you organize the screws of different types so that it will be easier for you to find the correct size when you need them. Keeping the screws organized can help you save a lot of time.
  • Work Stand: Having a work stand come in handy while you work on your RC car. You can’t always hold the RC vehicle in one and work on it with the other. If you don’t have one, we suggest you get one at the earliest.
  • Double-Sided Tape & Glue
  • Batteries: Always carry some spare batteries for your controllers/RC vehicles.
  • Work Surface Mat: Rolling a mat before starting to work on your RC will make it easy for you to clean the table after you’re finished. Having a Work Mat will also avoid making your table dirty.
  • There are also other tools that you will eventually need and we suggest you have a look at them here.

Conclusion

Having a well-organized toolbox for your RC Car and carrying it every time you take it out for a spin is a good practice because you never know what’s going to happen. And you don’t ever want to be stuck because of not having the right tool for the job.

The tools mentioned in this article are the basic RC tools every enthusiast should have. Make sure that you spend money wisely on good quality products and not on cheap alternatives. Feel free to visit our online store for the best RC tools in the market.